Pad mounted and oil immersed transformers produced by Wisegj

Jiangsu Wisegj Power Co., Ltd.

Transformers & Substations Built for the Grid

220 V to 500 kV · IEC & ANSI/IEEE compliant

Learn More
Three phase pad mounted transformer for underground distribution

Underground Distribution

Three Phase Pad Mounted Transformers

Loop or radial feed · Tamper-resistant enclosure

Learn More
Oil immersed power transformer for utility substations

Transmission & Utility

Power Transformers up to 500 kV

ONAN / ONAF cooling · On-load tap changers

Learn More
Three phase oil immersed distribution transformer

Distribution Networks

Low-Loss Oil Immersed Transformers

Hermetically sealed · Routine-tested every unit

Learn More
Wisegj engineering and project support team

Engineering Support

Talk to Our Transformer Engineers

Specification review · Drawings · Test reports

Learn More
0+
Years of team experience in transformers
0 kV
Maximum voltage class supplied
0 m²
Verified production floorspace
0+
R&D and technical engineers
0
Qualified supply-chain partners
0/5
Average buyer rating
Core Products

Transformer & Substation Product Lines

Six engineered families covering residential feeders, commercial buildings, renewable plants and utility transmission. Every rating is designed to your specification and verified by routine factory testing before dispatch.

High voltage oil immersed power transformer with radiators Up to 500 kV

Power Transformer

Step-up and step-down units for utility substations, industrial plants and renewable grid interconnection.

  • Voltage35 kV – 500 kV class
  • CoolingONAN / ONAF
  • StandardIEC 60076 / IEEE C57
OLTC / NLTC Low Loss CE Certified
View Range
Cast resin dry type transformer for indoor installation Indoor Safe

Dry Type Transformer

Cast resin, oil-free transformers for hospitals, high-rise buildings, tunnels and fire-sensitive locations.

  • Rating30 – 2,500 kVA
  • PrimaryUp to 35 kV
  • InsulationClass F / H
Flame Retardant Fan Cooling CE Certified
View Range
Prefabricated compact substation with transformer and switchgear Plug & Play

Compact Substation

Factory-assembled MV switchgear, transformer and LV distribution in one enclosure for fast site commissioning.

  • Rating100 – 2,500 kVA
  • MV side10 kV – 35 kV
  • StandardIEC 62271-202
Prefabricated Solar & Wind CE Certified
View Range
Company Profile

A Specialist Transformer Supplier Based in Suzhou, China

Jiangsu Wisegj Power Co., Ltd. designs, assembles and exports medium and high voltage equipment from 220 V up to 500 kV: power transformers, distribution transformers, pad mounted transformers, dry type transformers, compact substations, switchgear, distribution boxes and voltage stabilizers.

Our engineering team brings more than 20 years of hands-on transformer experience. Every project is reviewed by engineers before quotation, built under ISO 9001 quality control and shipped with full routine test reports, so procurement teams receive equipment that matches their utility specification the first time.

  • Own production base with full industry certificates
  • 50+ engineers in R&D and technical support
  • Supplier to Fortune 500 companies
  • 24-hour pre-sale and after-sale response
  • OEM, ODM and design-based customization
  • Finished product inspection on every unit
TÜV Rheinland logo

Production capability, floorspace and quality inspection verified onsite by TÜV Rheinland, an independent third-party inspection body.

Why Buyers Choose Wisegj

Engineering Capability You Can Audit

Every claim below is backed by third-party inspection data, certificates or documents we share with your QA team before order.

Verified Factory Capacity

6,847 m² inspected floorspace with dedicated winding, core assembly, drying, tanking and test areas.

In-House Testing

Ratio, resistance, loss, impedance, dielectric and oil BDV tests documented for each serial number.

Design Customization

Ratings, vector group, impedance, taps, bushings, cooling and enclosure adapted to utility specs.

Export Logistics

Seaworthy packing, shock indicators and full Incoterms coverage from EXW to DDP.

Certified Systems

ISO 9001, ISO 14001 and ISO 45001 management systems, valid through 2027.

Complete Documentation

GA drawings, nameplate drafts, test reports and O&M manuals supplied in English.

211 Supply Partners

Qualified sources for silicon steel, copper, bushings and accessories secure stable lead times.

24 h Engineer Response

Technical questions and after-sales issues receive a qualified reply within one working day.

Production Strength

Inside Our Transformer Production

From core stacking to final dielectric testing, each step is controlled by documented work instructions and inspection checkpoints.

Specification Review

Engineers check ratings, standards, site altitude and ambient conditions.

Drawing Approval

GA drawing, nameplate and guaranteed losses confirmed with buyer.

Controlled Production

Core, winding, drying and tanking with in-process QC records.

Routine Testing

Full test report per unit; third-party witness testing welcome.

Packing & Shipping

Export crating, impact recorders and complete shipping documents.

Qualifications

Certificates & Compliance

Certificate numbers are listed so your compliance team can verify them directly with the issuing bodies. Click any certificate to enlarge.

Buyer's Guide

How to Choose the Right Transformer Type

A quick engineering comparison our application team uses with EPC contractors and utilities when shortlisting equipment.

Transformer TypeTypical RatingInstallationBest ApplicationKey Standards
Three Phase Pad Mounted45 – 5,000 kVA, up to 34.5 kVOutdoor, ground pad, underground cable feedCommercial sites, solar farms, data centers, campusesIEEE C57.12.34, C57.12.28
Single Phase Pad Mounted10 – 250 kVAOutdoor, residential easementsHousing developments, rural underground loopsIEEE C57.12.38
Oil Immersed Distribution30 – 2,500 kVA, 6 – 35 kVOutdoor platform, pole or substationUtility distribution, industrial plants, minesIEC 60076-1/-2/-3
Cast Resin Dry Type30 – 2,500 kVA, up to 35 kVIndoor, close to the loadHospitals, high-rises, tunnels, marine, fire-sensitive areasIEC 60076-11
Power Transformer35 – 500 kV classOutdoor substationTransmission, generation step-up, grid interconnectionIEC 60076, IEEE C57.12.00
Compact Substation100 – 2,500 kVA, 10 – 35 kVOutdoor, prefabricated enclosureRenewables, urban networks, temporary or fast-track projectsIEC 62271-202

Ranges shown are typical production ranges. Ratings outside these values can be engineered on request. Explore detailed product guides in our resource center.

Global Supply

Serving Utilities and EPCs Across Five Continents

Equipment is configured for local grid codes, frequency (50/60 Hz), climate and installation practice in each market.

North America

ANSI/IEEE pad mounted and pole mounted transformers for utilities, solar and commercial projects.

South America

Distribution and power transformers for mining, utilities and high-altitude installations.

Western Europe

CE-certified IEC equipment, dry type transformers and compact substations.

Middle East

High-ambient designs with enhanced cooling for desert and coastal environments.

Southeast & Central Asia

Utility distribution, industrial parks and grid expansion programs.

Africa

Rural electrification, mining and compact substations for fast deployment.

Delivery Terms

FOB, CFR, CIF, EXW, FAS, FCA, CPT, CIP, DDP, DDU and express delivery.

Payment Methods

T/T, L/C, D/P, D/A, escrow and other secure options agreed per contract.

Currencies

USD, EUR, GBP, CAD, AUD, JPY, HKD, CHF and CNY.

FAQ

Questions Procurement Teams Ask Us

Straight answers from our engineering and export departments.

Which standards do Wisegj transformers comply with?
Units are designed and tested to IEC 60076 or ANSI/IEEE C57.12 series standards depending on the destination market. Our product lines hold CE certificates, and production runs under ISO 9001, ISO 14001 and ISO 45001 management systems.
What voltage and capacity range can you supply?
Our portfolio covers 220 V to 500 kV, from 10 kVA single phase pad mounted transformers for residential feeders up to oil immersed power transformers for transmission substations.
Which factory tests are performed before shipment?
Every unit receives routine tests: winding resistance, voltage ratio and vector group, impedance and load loss, no-load loss and current, applied and induced voltage withstand, plus oil dielectric strength for liquid-filled units. Type test reports are available, and third-party witness inspection is welcome.
Can transformers be customized for my project?
Yes. We provide OEM, ODM, design-based and sample-based customization, including ratings, vector group, impedance, tap range, bushing configuration, cooling method, insulating fluid (mineral oil or natural ester), enclosure color and nameplate language.
What trade and payment terms are accepted?
We work with FOB, CFR, CIF, EXW, FCA, CIP, CPT, DDP and other Incoterms, and accept T/T, L/C, D/P and D/A among other payment methods in USD, EUR, GBP, CAD, AUD and other major currencies.

Technical Data Checklist for a Faster, Accurate Offer

Sharing these parameters lets our engineers return a compliant design and guaranteed losses without extra clarification rounds.

  • Rated power (kVA / MVA)
  • Primary & secondary voltage
  • Frequency (50 / 60 Hz)
  • Vector group & impedance
  • Tap changer type & range
  • Cooling method & fluid
  • Applicable standard (IEC / IEEE)
  • Site altitude & ambient range
  • Loss limits or efficiency target

Have a Specification Ready for Review?

Send your datasheet or tender documents. A transformer engineer, not a sales script, will review it and respond within one working day.

[email protected]
Contact Our Engineers